Ceiling Fan Installation Tips

13 September 2017
 Categories: , Blog

Share

Installing a ceiling fan is one of the best ways of lowering your room temperature and saving on air conditioning bills. Of course, this will only be the case if the installation is handled properly. Keep these tips in mind if you wish to do the installation:

Choose a Fan of the Right Size

The size of the fan determines how much air it can move through one rotation. A big room requires more air movement than a smaller room for the effect of the fan to be felt. This means big rooms need a big fan; otherwise, your fan will be too inefficient for its effect to be felt. An electrician will help you determine the right calculations.

Position It at the Middle of the Room

The position of the fan determines its efficiency; if you install it towards one side of the room, then that is the only side that will receive efficient air circulation. Therefore, position the fan approximately in the middle of the room so that it can serve the whole room.

Install It at the Right Height

The height of the fan determines both the efficiency and security of the fan. Installing the fan too high reduces its effectiveness because it may not be able to move air in the lower parts of the house. The distance between the fan and the ceiling also matters; if the fan is too close to the ceiling, the circulation of the air between the fan and the ceiling will be hampered. Installing it too low is also dangerous since it can hurt other people or cause damage.

Therefore, a right balance has to be struck so that the fan is neither too low nor too high. An experienced electrician will see to it that the fan is installed at the correct height. Therefore, don't buy the supplies before talking to the installer. For example, the downrod that attaches the ceiling to the fan determines its height; therefore, your fan will hang at the wrong height if you buy the wrong downrod.

Let A Licensed Electrician Handle The Electrical Connection

Although it is not advisable, you can install a ceiling fan without an electrician's involvement if there is an existing light fixture where the fan can be installed. Without a light fixture, however, you need a licensed electrician to install a light fixture where the fan can be attached. That is definitely not a DIY kind of job.

Contact a company like Richardson Charles E Electric for more information.