DIY Electrical Project Safety Tips From Electrical Contractors

1 July 2019
 Categories: , Blog

Share

It's great to be able to work on your own home and save some money over having to hire professional contractors. However, there are some projects that are just too dangerous to tackle as DIY. Some of the most dangerous are those that involve working with or around a home's electrical service.

If you plan to tackle an electrical project on your home or will be working near live electrical wires, these electrical contractors tips will help you do so more safely:

Electrical Contractor Tip: Always Turn Off the Main Power Supply Before Working With or Around Electrical Wires

If you will be working around or with the electrical wires in your house, then you absolutely must turn off the power supply to the room at the breaker box. This is important because many of the DIY homeowners that are injured by electrical current each year say that they thought the power was turned off or the lines weren't live. Avoid this mistake by knowing for sure the current is off and the wires are safe to work with. And, when in doubt, don't take a risk by assuming there is no current present!

Electrical Contractor Tip: When a Breaker Trips You Need to Figure Out Why

Electrical breakers don't typically trip for no reason. And, when they do trip you absolutely must figure out why!

For example, if your water heater's breaker keeps tripping, then this is a sure sign there is a serious problem with your water heater. Perhaps an element is malfunctioning or a thermostat isn't working correctly. If you don't identify the root cause of the problem, then you could end up with a split tank that floods your garage or even a house fire.

Electrical Contractor Tip: Never Use Extension Cords on Major Appliances

While you may be tempted to use an extension cord to plug in your new window air conditioner or space heater, this is never a good idea. Extension cords should never be used on appliances that draw a lot of power because they can easily overheat the cord and lead to an electrical fire.

Electrical Contractor Tip: Know Your Limitations and Stay Within Them

In order to become a licensed electrical contractor, there are a lot of required educational courses and years of on-the-job training. Since you don't have this vast knowledge base and experience, it's always best to have electrical work completed by a licensed professional. While it's fine to tackle some minor jobs yourself, know what your limitations are and stay safe by having more advanced projects done by a professional.